We fix what's broken, fast, and we don't disappear after the invoice. Same-day appointments available across Clover and the surrounding zip codes.
Our Clover dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC didn't start as a franchise chasing volume. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Clover, SC.
We're not the biggest name in Clover — we're the company that tells you what actually needs fixing instead of what pads the ticket. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, residential or commercial.
Clover's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Clover and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Clover is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Clover rooftop unit. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
Whether it's a mid-summer breakdown or a planned system replacement, our Clover techs handle it with the same level of care.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Clover dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Clover homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services rooftop units and package systems across Clover, with service agreements built around your operating hours.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Clover households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
We quote a flat rate before work begins and that number doesn't change once you approve it.
A technician doesn't consider the job done until the system is tested and performing correctly.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Clover.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A musty smell often points to mold or moisture buildup somewhere in the ductwork.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Emergency calls get moved to the front of the line automatically.
If something isn't right after we leave, we come back and make it right.
Our techs recognize brand-specific quirks instead of learning your system on the job.
We explain what failed, why it failed, and what the options are.
Maintenance plan members get priority scheduling and discounted rates.
A snapshot of the feedback that keeps us accountable.
"I called three other companies first and this was the only one that actually picked up. Fixed on the first visit and explained everything in terms I could actually understand."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Kept our kitchen running through the weekend rush."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. My energy bill dropped noticeably the first month with the new system."
"The tech walked me through what he was checking as he went, which I really appreciated. This is the company I'm saving in my phone now."
After thousands of service calls across Clover, a handful of causes show up again and again.
Clover's seasonal swings put real stress on a system that isn't maintained regularly. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Clearing debris, leaves, and overgrown landscaping away from an outdoor condenser unit gives it room to breathe and keeps it running efficiently. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Clover area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Handles the majority of Clover installs and specializes in properly sizing equipment for older housing stock.
Keeps the emergency truck stocked based on what actually fails most often locally.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Ask your technician about current plan pricing during any service call.
Our dispatch area extends throughout the greater Clover region and nearby towns within Clover, SC.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
Ask about financing during your in-home estimate to see what fits your situation.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
From the older, established streets near the center of Clover to the newer developments on the outskirts, our trucks cover the full footprint of the city.
If you manage several units or a shared system across a Clover property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Clover installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Clover and the neighboring communities, keeping response times tight because our trucks stay close to home.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
