No overselling, no guesswork — just a Hvac crew that diagnoses it right the first time. Emergency dispatch available across Clover and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC grew one honest service call at a time in communities like Clover. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Clover, SC.
We're not the biggest name in Clover — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Clover's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the maintenance schedules we recommend — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Clover is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. We keep parts inventory stocked based on what actually fails most often on Clover's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Clover dispatch team moves emergency tickets to the front of the schedule so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Clover homes, which is exactly why most repairs don't require a return visit.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Clover homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Most installs in Clover are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services rooftop units and package systems across Clover, with priority response for facilities that can't afford downtime.
Property managers working with multiple Clover locations can set up a standing account so every site gets consistent service history and pricing.
Most emergency breakdowns start as a small, ignorable warning sign months earlier. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Clover households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
This is the standard every Clover technician on our team is held to.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
If anything feels off after we leave, one call gets a tech back to your Clover address.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Clover.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
If something isn't right after we leave, we come back and make it right.
We run background checks because you're letting someone into your home.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
We don't write these — our customers do.
"The furnace stopped working overnight and someone was at our door before 9am. No pressure to buy a whole new system when a repair was all we needed."
"Signed up for the annual plan after our first repair and it's paid for itself already. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Documentation for our records was thorough and easy to file."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. Installation crew was in and out in a day and left the space cleaner than they found it."
"The tech walked me through what he was checking as he went, which I really appreciated. Genuinely relieved to have found a crew that answers when it matters."
After thousands of service calls across Clover, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Clover area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Handles the majority of Clover installs and specializes in properly sizing equipment for older housing stock.
Runs point on overnight and weekend emergency calls throughout Clover.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Every technician we send is licensed in accordance with Clover, SC requirements and carries full liability coverage.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Yes, we service systems regardless of who originally installed them.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
Ask about current after-hours rates when you call +1-866-805-8548.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
If you manage several units or a shared system across a Clover property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Clover installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Clover, SC and near Clover, there's a strong chance we already service your street.
Coverage isn't limited to a single neighborhood or subdivision — our Clover dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
